Static transfer switches critical loads from two independent AC power line to any electronic devices that are continuously transferred. The system monitors two AC input any one of them goes beyond the specified tolerances of the critical load is transferred to the other. However DATASTS; Input selector 3-phase Static Voltage Regulators; 3-phase output is fed from the mains fed more than 1 in regulating feeding critical loads to provide continuous three phase loads fed by selecting the best ones are transferred to the system.
4 parts separated by a need to examine the system;
Input voltage range that can serve 50-300VAC Static Transfer System; Introduction of the 3-phase AC power supply, the technical values set by selecting the most appropriate phase, the output of the first phase AC input power supply as Static Voltage Regulator Output Channel sends. Selected phase sets the technique goes beyond the tolerances Static Transfer System, load automatically transfer to the other phase is the most appropriate one.
Manual By-Pass
Maintenance purposes. A selected phase at the input of the network connects the outlet duct. -0- Position STSREG31 system load is not connected. -1 Position STSREG31 System bypassing input phase L1 is the output channels bağlar.normal working position. -2 Position STSREG31 regulated output channel is connected to the load.